How To Create Custom Boot Logo Mtk Devices Using WiselinkTool

How to create custom boot logo on Mtk Devices Using WiselinkTool

This is just another tutorial on how to create a custom boot logo like the one in the image above for MTK devices using WiseLink Tool. Its easy and straight forward. Just watch the video or follow the tutorial below.

Today I will be sharing with you a tutorial on how to create boot logo on mtk device using wiselinkTool

Last Time i post a Tutorial on how to change boot logo on mtk device

Logo.bin: this is the first image you see when your device boots up. It contains the first boot image and also all the battery charging icons. This file is found inside your backup folder that means you must have an mtk backup of your rom to access this file.

Requirements:

Install mtk mt65xx drivers

Download and install WiseLink Tool from here

Stock ROM of the phone you want to flash  (optional)

NB: You can also extract logo.bin from devce using Miracle Box or MTK Droid Tools.

SP Flash Tool to flash the new logo.bin created

Design the image you will want to be the new logo of your device

Steps:

Launch WiseLinkTool

Click on Custom tab

Click LOGO button

Navigate to the Stock ROM folder and select logo.bin file

After a few seconds, the stock logo will be loaded.

Now click on Replace Boot Logo button and select the custom image you designed

Again click on Replace Android Logo and select the custom image you design

After replacing the image for both Boot Logo and Android Logo,

Click on Save LOGO button

Select path and click save button.

You have now succeeded in creating a logo.bin file

To flash this new logo.bin file to the device,

Copy the newly created to the stock rom folder (replace old one)

Launch SP Flash Tool or WiseLinkTool

Click on Scatter Loader

Select Scatter file

Tick ONLY LOGO

Click Download button

                             Connect device and wait for flash process to complete        -> takes about few secs

Reboot your phone 

Done.
If you have any question, drop it in the comment box.
If this has been helpful don’t forget to share

HOW TO CHANGE THE BOOT LOGO ON MTK DEVICES USING LOGO BUILDER

HOW TO CHANGE THE BOOT LOGO ON  MTK DEVICE USING LOGO BUILDER

One of the things On MTK devices the ability to customize your device to your very taste. Right from the booting up to shutting down.

Today I will be sharing with you a tutorial on how to change your boot logo on mtk device.

Logo.bin: this is the first image you see when your device boots up. It contains the first boot image and also all the battery charging icons. This file is found inside your backup folder that means you must have an mtk backup of your rom to access this file. 

Logo_bin: this is the second image that appears when your device is booting up. This image appears very quickly just about 3 secs. You can find this image inside your phone. It’s located inside

/system/media/image/logo_bin.

Requirements:
Pc.
Mtk backup of your rom.
Logo builder. Download here.
File Manager. Preferably Root explorer. Download here.
Custom recovery. CWM OR TWRP
Sp Flashtool (optional) download here.
Brain

How to change logo.bin:1. First you have to copy the logo.bin file from your mtk backup folder to the desktop.

2. Extract “LogoBuilder_v1.5.1”, open the folder and launch logo builder.

3. In the next screen that appears, just click on close.

4. Click on create project.

5. Select the logo you copied earlier and click open.

6. Select an empty folder or you create a folder where you will like to extract the files and click ok

7. The logo.bin will be extracted. You will see a copy in the logo builder window.

8. Go to the folder where you extracted the files and edit any of the images.

9. Make sure you use the same resolution and also rename the image you want to use to the same name as the one you want to replace.

10. Once you are through editing the images. Go back to the logo builder and click on make.

11. After re packing, a flashable zip  and logo.bin  file will be created.

12. Open the folder where you extracted the logo.bin and copy the update.zip file.

13. Paste the update.zip in the root directory of your sd-card and flash through recovery.

14. CONGRATULATIONS!!! You have just successfully changed your boot logo.

N.B:

“For advanced users, you can also flash the logo.bin you see in the folder with sp flash tool.

“It’s not compulsory the images you use are png, just rename any image to png.

“Make sure the file size of the image you are using is not too large.

Second Image.

How to change logo_bin:

1. Open the logo builder if you have closed it.

2. Click on the second BL as shown in the image below.

3. Select any image you want to use and click open (make sure the image resolution is the same resolution as your device).

4. Select the folder where you will like to save the image and click on save.

5. Now open the folder where you saved the file and copy it to your sd card.

6. On your phone use any root file explorer (preferably root explorer)

7. Copy and paste the logo_bin from your sd-card to /system/media/images/

8. That’s all. Now you are done.

Tip: you can also create the logo_bin by just dragging any image on to the logo builder.

Though this has been tested on different mtk devices without any error. 9jarom won’t be held responsible for any damage done to your device.

Credit goes to  KADAN. the developer of this software.

If you have any question, drop it in the comment box.

If this has been helpful don’t forget to share

How to remove privacy password protection on mtk device

How to remove privacy password protection on mtk device using miracle box

This easy guard will guide you on how to remove privacy password protection on mtk device using miracle box crack

Guide:

Download miracle box latest version from here

Launch Miracle Box
Under MTK tab click Unlock/Fix
Tick Clear Anti-theft
Click Start button
When the backup flash pop up appears, Select NO
Connect the device to PC
Miracle Box will detect the device and start the process
When you see Done!, the process is complete
Disconnect and reboot phone

Note
First boot after this process is a bit longer than normal

See Picture Guide below

see picture guide below

HOW TO REMOVE FRP LOCK ON MTK DEVICES

HOW TO REMOVE FRP LOCK ON MTK DEVICES

Am going to show you how to remove factory reset protection {FRP} on mtk device 

WHAT IS FRP {factory Reset rotection} ?.

Factory Reset Protection (FRP) is a security method that was designed to make sure someone can't just wipe and factory reset your phone if you've lost it or it was stolen. Starting with Android Lollipop, FRP is "standard" in vanilla Android, and most companies making our phones have implemented it in their own models. It's a good thing — it makes a stolen phone harder to use, which makes it less appealing to thieves, and anything that can protect our data on a phone we've lost is welcome.
      The problem is that people are selling or trading or even giving away phones with FRP enabled and this makes things difficult for the next user.

How it works explains why. If you reset a phone with FRP enabled, you have to provide the user name and password for the last Google account that was registered with the device. There are random work-arounds on the Internet, but they tend to get patched almost as soon as they are discovered. You'll pretty much need to know the login details for the last account to use the phone before you can do anything with it if FRP was enabled before you reset it.

With these easy step am goin to show below

Downnload miracle box latest version here

Launch Miracle Box
Under MTK tab click Unlock/Fix
Tick Clear Settings/Frp
Click Start button
When the backup flash pop up appears, Select NO
Connect the device to PC
Miracle Box will detect the device and start the process
When you see Done!, the process is complete
Disconnect and reboot phone

Note
First boot after this process is a bit longer than normal

See Picture Guide below